tdxstep256:drawgbk(open>close,rgb(48,41,124),rgb(0,0,0),0,1,0);
cc:=abs((2*close+high+low)/4-ma(close,20))/ma(close,20);
dd:=dma(close,cc);
下轨绿:=(1-7/100)*dd;
d:=ref(close,1)<ref(下轨绿,1);
k:=ref(d,1);
df:=(close-ref(close,1))/ref(close,1)*100<(-4.95);
aa:=barslast(df);
箱体:=ref(low,aa+1);
突破箱体:=cross(close,ref(close,aa+1));
rsv:=(close-llv(low,9))/(hhv(high,9)-llv(low,9))*100;
短期底部:=llv(open,30);
aa10:=ma(close,10);
aa12:=ma(close,12);
bb10:=atan(aa10-ref(aa10,1))*3.1416*10;
bb12:=atan(aa12-ref(aa12,1))*3.1416*10;
ma13:=ma(close,13);
var2:=(close-ma(close,6))/ma(close,6)*100;
var3:=(close-ma(close,12))/ma(close,12)*100;
var4:=(close-ma(close,24))/ma(close,24)*100;
var5:=(var2+2*var3+3*var4)/6;
var6:=ma(var5,3);
var7:=dma(ema(close,12),sum(vol,5)/3/capital);
var8:=(close-var7)/var7*100;
var9:=ref(var8,1)<0-40 and var8>ref(var8,1) and ref(var8,1)<ref(var8,2) and var8-ref(var8,1)>2.5;
vara:=(close-ma(close,6))/ma(close,6)*100;
varb:=(close-ma(close,12))/ma(close,12)*100;
varc:=(close-ma(close,24))/ma(close,24)*100;
vard:=ref(close,1);
vare:=sma(max(close-vard,0),5,1)/sma(abs(close-vard),5,1)*100;
varf:=(high+low+close)/3;
var10:=(varf-ma(varf,14))/(0.015*avedev(varf,14));
var11:=(ma(amount,5)/ma(vol,5)/100-ma(amount,110)/ma(vol,110)/100)/(ma(amount,5)/ma(vol,5)/100)<0-0.273;
var12:=(close-ma(close,30))/ma(close,30)<0-0.125;
var13:=var11 and var12;
var14:=vara>=0-45 and vara<=0-10 and varb<=0-15 and varc<=0-20;
var15:=count(var14,1)>=1;
var16:=var13 and var15;
var17:=1;
vab0:=531;
vab1:=1510000;
vab2:=vab0+vab1;
vab3:=if(date>vab2,0,1);
vara12:=sma(high,10,9)*vab3;
vara13:=sma(low,10,9)*vab3;
var18:=close*vol;
var19:=ema((ma(var18,4)/ma(vol,4)+ma(var18,6)/ma(vol,6)+ma(var18,13)/ma(vol,13)+ma(var18,24)/ma(vol,24))/4,1);
var1a:=1*var19;
var1b:=var19*0.92;
var1c:=ema(close,34);
var1d:=ma(var1c*1.12,5);
var1e:=ma(var1c*0.82,5);
var1f:=close<var1e;
var20:=(ma(amount,5)*var17/ma(vol,5)/100-ma(amount,125)/ma(vol,125)/100)/(ma(amount,5)/ma(vol,5)/100)<(0-0.4)*var17;
var21:=hhv(high,500);
var22:=llv(low,500);
var23:=hhv(high,250);
var24:=llv(low,250);
var25:=hhv(high,125);
var26:=llv(low,125);
var27:=ma((var21*0.45+var23*0.5+var22+var24+var26)/5,35);
var28:=ma((var23*0.62+var26)/2,35);
var29:=ma((var23*0.75+var26)/2,18);
var2a:=ma((var23*0.93+var27*2+var28*1.8+var29*1.5)/4,18);
var2b:=ma((var21*0.95+var27*3+var28*2)/3,35);
var2c:=var27;
var2d:=var28;
var2e:=var29;
var2f:=var2a;
var30:=var2b;
var31:=close-ref(ma(close,20),11)<0-2;
var32:=indexa/100000000;
var33:=indexadv;
var34:=indexdec;
var35:=var18/(var18+var19)*var17;
var36:=var19/(var18+var19)*var17;
var37:=ema(var35,10);
var38:=ema(var36,10);
var39:=ema(var37,10);
var3a:=ema(var38,20);
var3b:=ema(var37,3);
var3c:=ema(var39,6);
var3d:=ema(var3a,2);
var3e:=var3c-var3d;
var3f:=var3c-ref(var3c,1)>0 and ref(var3c,1)-ref(var3c,2)<0;
var40:=if(cross(var3b,var3c) and var3c<=20,30,0);
var41:=var40;
var42:=sma(amount/vol/100,13,1)*1.15;
var43:=sma(amount/vol/100,13,1)*0.85;
var44:=close-ref(ma(close,20),11);
var45:=close<var1e and var20 and close<var43 or (close<var1e and var31 and var20) or (close<var1e and close<var43) or (close<var1e and var20 and close<var43) or (var20 and close<var2c) or (var20 and var31 and var44<0-1.5) or (var20 and close<var1e) or (var20 and var44<0-1.5) or (var31 and close<var43) or (close<var2c and var44<0-1.5) or (close<var1e and var31);
var46:=(close-ma(close,6))/ma(close,6)*100;
var47:=(close-ma(close,12))/ma(close,12)*100;
var48:=(close-ma(close,24))/ma(close,24)*100;
var49:=ref(close,1);
var4a:=sma(max(close-var49,0),5,1)/sma(abs(close-var49),5,1)*100;
var4b:=(high+low+close)/3;
var4c:=(var4b-ma(var4b,14))/(0.015*avedev(var4b,14));
var4d:=(ma(amount,5)/ma(vol,5)/100-ma(amount,110)/ma(vol,110)/100)/(ma(amount,5)/ma(vol,5)/100)<0-0.273;
var4e:=(close-ma(close,30))/ma(close,30)<0-0.125;
var4f:=var11 and var12;
var50:=var2>=0-45 and var2<=0-7 and var3<=0-11 and var4<=0-14;
var51:=count(var50,1)>=1;
var52:=var4f and var51;
var53:=var20 and close<var1e and var31 and close<var2c and var45 and var52;
var54:=(close-ma(close,6))/ma(close,6)*100;
var55:=(close-ma(close,12))/ma(close,12)*100;
var56:=(close-ma(close,24))/ma(close,24)*100;
var57:=ref(close,1);
var58:=sma(max(close-var57,0),5,1)/sma(abs(close-var57),5,1)*100;
var59:=(high+low+close)/3;
var5a:=(var59-ma(var59,14))/(0.015*avedev(var59,14));
var5b:=var54>=0-15.8 and var54<=0-12.2 and var55<=0-20.799999 and var56<=0-27.5 and var58<=11.7 and var5a<=0-145;
var5c:=10+26;
var5d:=cost(10)*0*vab3;
var5e:=(ma(amount,5)/ma(vol,5)/100-ma(amount,125)/ma(vol,125)/100)/(ma(amount,5)/ma(vol,5)/100);
var5f:=ma((llv(low,45)-close)/(hhv(high,45)-llv(low,45))*100,5);
var60:=cross(0-5,var5f) and var5e<0-0.4 and (close-ma(close,30))/ma(close,30)<0-0.19;
var61:=ma(close,3);
var62:=ref(close,2)*0.865;
var63:=ref(close,13)*0.772;
var64:=min(var62,var63);
var65:=100*vol/capital;
var66:=ma(close,13);
var67:=if((close-var64)/close<0.03 and sum(var65,5)/5<1.8,1,0);
开始控盘:=stickline(var6<=0-10,0,0-20,5,0)*vab3;
出击:=if(var9 or var16 or var53 or var5b or ((close-var64)/close<0.03 and sum(var65,5)/5<1.8),120,0);
var68:=0;
varq:=ma(close,152);
varw:=ma(close,194.160004);
varee:=varw+2*std(close,170);
varr:=varq+2*std(close,170);
vart:=if(date>1080822,0,1);
var611:=ema(hhv(high,500),21);
var71:=ema(hhv(high,250),21);
var81:=ema(hhv(high,90),21);
var91:=ema(llv(low,500),21);
vara1:=ema(llv(low,250),21);
varb1:=ema(llv(low,90),21);
varc1:=ema((var91*0.96+vara1*0.96+varb1*0.96+var611*0.558+var71*0.558+var81*0.558)/6,21);
vard1:=ema((var91*1.25+vara1*1.23+varb1*1.2+var611*0.55+var71*0.55+var81*0.65)/6,21);
vare1:=ema((var91*1.3+vara1*1.3+varb1*1.3+var611*0.68+var71*0.68+var81*0.68)/6,21);
varf1:=ema((varc1*3+vard1*2+vare1)/6*1.738,21)*vab3;
var101:=ref(low,1);
var111:=sma(abs(low-var101),3,1)/sma(max(low-var101,0),3,1)*100;
var121:=ema(if(close*1.35<=varf1,var111*10,var111/10),3)*vab3;
var131:=llv(low,30);
var141:=hhv(var121,30)*vab3;
var151:=if(ma(close,58),1,0);
var161:=ema(if(low<=var131,(var121+var141*2)/2,0),3)/618*var151;
var171:=if(var161>50,50,var161)/20*15*vart*vab3;
sg:=ema(hhv(high,1),8);
x1:=ema(close,8);
x30:=x1<ref(x1,1) and close<x1;
x31:=if(sg<ref(sg,1) or x30,1,0);
lc:=ref(close,1);
操作线:=sma(max(close-lc,0),2,1)/sma(abs(close-lc),2,1)*100;
趋势线:=sma(max(close-lc,0),14,1)/sma(abs(close-lc),14,1)*100;
震仓线:=45;
震仓线2:=50;
逃命线:=80;
抄底线:=20;
绝底线:=5;
pp2:=操作线<震仓线2 and ref(操作线,1)>震仓线2;
pp:=操作线<震仓线 and ref(操作线,1)>震仓线;
pp3:=操作线<抄底线 and ref(操作线,1)>抄底线*vab3;
鼎牛涨停狙击:=(count(x31=1,4)=3 and x31=0 and open<close and (close-ref(close,1))/ref(close,1)>0.085)*89>=89 or ((close-ref(close,1))/ref(close,1)>0.085 and (ref(pp3,1) or ref(pp,1))) and vab3=1;
精准第一买:k and 突破箱体 and 鼎牛涨停狙击;
tdxstep257:drawicon(精准第一买,1,32);
{-----------------------------------}
上一指标公式:穿透沼泽 转载和谐完全加密详解 通达信加密穿透
下一指标公式:突破买入 转载和谐完全加密详解 通达信指标加密
☉ 好公式网发布的指标公式主要用于软件技术面分析,仅供参考,勿用于实际操作,据此操作风险自负!
☉ 解压密码:www.goodgongshi.com 就是好公式网域名,希望大家看清楚,切勿输错。
☉ tnc和tni格式指标公式,仅可以用通达信软件引入使用,例如可以用通达信软件引入使用指标公式;
☉ tne格式指标公式,仅可以用通达信软件公式编辑器5.0版导入,高版本兼容低版本;
☉ fnc格式指标公式,可以用大智慧软件新一代高速行情分析系统股票软件使用,少部分可以用分析家软件引入使用;
☉ alg格式指标公式,仅仅可以用飞狐交易师软件引入使用;exp格式指标公式,仅可以用大智慧经典版软件引入使用;
☉ hxf格式指标公式,仅可以用同花顺软件引入使用。
☉ 如果您发现下载软件链接错误,请联系管理员报告错误。
☉ 好公式网欢迎各位网友帮忙宣传转发本站网址,有您的支持,我们会做得更好!
☉ 本文鼎牛暴利狙击详解 通达信狙击仅供学习研究。