爆涨临界点 副图 无未来 通达信未来源码

指标公式详细说明

爆涨临界点在指标库中从数万指标中今晚挑出来给大家分享，此指标只建议学习研究使用，不建议作为买卖依据。原作者编写有点复杂语句较多本人未做任何修改

此公式用到各种指标非常之多，是我所见到合集指标合并最多的一个，基本上囊括了分享指标中大多数或你可以在很多指标中看到这个指标雷同的部分。

drawgbk(1,rgb(36,38,40),rgb(24,16,51),0,1,0);

var1b := (100 * (ema(ema(c - ref(c,1),6),6))) / (ema(ema(abs(c - ref(c,1)),6),6));

抄底红箭 := ((llv(var1b,2) = llv(var1b,7)) and (count(var1b < 0,2))) and cross(var1b,ma(var1b,2));

量能 := if((ma((vol - ref(vol,1)) / ref(vol,1),10)) = drawnull,ema((vol - ref(vol,1)) / ref(vol,1),10),ma((vol - ref(vol,1)) / ref(vol,1),10));

股价 := if(((close - ma(close,22)) / ma(close,22)) = drawnull,(close - ema(close,22)) / ema(close,22),(close - ma(close,22)) / ma(close,22));

主力量能 := if(((股价 * (100 + 量能)) - (ma(股价 * (100 + 量能),7))) = drawnull,(股价 * (100 + 量能)) - (ema(股价 * (100 + 量能),7)),(股价 * (100 + 量能)) - (ma(股价 * (100 + 量能),7)));

量能金叉 := cross(主力量能,0);

typ := ((high + low) + close) / 3;

cci := (typ - ma(typ,14)) / (0.015 * avedev(typ,14));

cci金叉 := cross(cci,-100);

a1 := ema(c,14);

a1x := ((a1 - ref(a1,1)) / ref(a1,1)) * 100;

出击a := if(a1x >= 0,ref(ema(c,14),barslast(cross(a1x,0)) + 1),drawnull);

出击a金叉 := cross(a1x,0);

diff := ema(close,12) - ema(close,26);

dea := ema(diff,9);

macd金叉 := cross(diff,dea);

mtr := expmema(max(max(high - low,abs(high - ref(close,1))),abs(ref(close,1) - low)),14);

hd := high - ref(high,1);

ld := ref(low,1) - low;

dmp := expmema(if((hd > 0) and (hd > ld),hd,0),14);

dmm := expmema(if((ld > 0) and (ld > hd),ld,0),14);

pdi := (dmp * 100) / mtr;

mdi := (dmm * 100) / mtr;

adx := expmema(((abs(mdi - pdi)) / (mdi + pdi)) * 100,6);

adxr := expmema(adx,6);

x1 := max(c,o);

x2 := min(c,o);

x := ((ref(c > o,2)) and (ref(x1,2) >= hhv(x1,2))) and (ref(x2,2) <= llv(x2,2));

b := barslast(x) + 2;

a := ((ref(x1,b) >= hhv(x1,b)) and (ref(x2,b) <= llv(x2,b))) and (every(v <= ref(v,1),b));

肉夹馍 := (((ref(a,1) and (c > o)) and (c > ref(hhv(h,b),1))) and (v > ref(hhv(v,b),1))) and (every(ma(c,5) > ma(c,10),b + 1));

平台起飞 : if(((last(((h - l) / ref(c,1)) < 0.1,5,0)) and (vol > (ref(vol,1) * 2))) and (c > (ref(c,1) * 1.05)),1,drawnull),nodraw,color6060a0;

nh := 18;

lowv := llv(low,nh);

highv := hhv(high,nh);

mav := ma(v,3);

横盘 := ((highv - lowv) / nh) < 0.15;

放量1 := v >= (1.8 * mav);

今天大阳 := ((c - ref(c,1)) / ref(c,1)) >= 0.05;

启动 : if((横盘 and 放量1) and 今天大阳,1,drawnull),nodraw,color4080ff;

a☆ := dma(((h + l) + (c * 2)) / 4,0.9);

b☆ := vol / (((h - l) * 2) - (abs(c - o)));

c☆☆ := (if(c > o,b☆ * (h - l),if(c < o,b☆ * ((h - o) + (c - l)),vol / 2))) + (if(c > o,0 - (b☆ * ((h - c) + (o - l))),if(c < o,0 - (b☆ * (h - l)),0 - (vol / 2))));

a☆☆ := (c☆☆ / 20) / 1.15;

攻击流量 := ((a☆☆ * 0.618) + (ref(a☆☆,1) * 0.382)) + (ref(hsl.hsl,2) * 0.168);

b☆☆ := ema(攻击流量,3);

流量 := if(b☆☆ > ref(b☆☆,1),1,0);

aa☆ := ((max(c,o) - min(c,o)) / min(c,o)) < 0.00618;

bb☆ := ((h - max(c,o)) / max(c,o)) > 0.00382;

dd☆ := ((min(c,o) - l) / l) > 0.00382;

ee☆ := ((abs(bb☆ - dd☆)) / c) < 0.00618;

星☆星 := ((aa☆ and bb☆) and dd☆) and ee☆;

星线选 := ((((星☆星 = 1) and (流量 = 1)) and (c > o)) and ((abs((c - ma(c,20)) / ma(c,20))) > 0.0382)) and ((h - max(c,o)) <= (min(c,o) - l));

星线确认 : if(((if((ref(星线选,1) = 1) and (c >= ref(c,1)),1,0)) and (c > o)) and (((c - ref(c,1)) / ref(c,1)) > 0.00618),1,drawnull),nodraw,colorff3399;

一阳穿三线 : if(((((cross(pdi,mdi) and cross(pdi,adx)) and cross(pdi,adxr)) and (close > open)) and ((c / ref(c,1)) > 0.5)) and (vol > (ma(vol,5) * 1.5)),1,drawnull),nodraw,color800080;

t31 := (ref(c,1) / ref(c,2)) >= 1.095;

t32 := (o > ref(c,1)) and (c > o);

t33 := ((h > c) and (o > l)) and (l >= ref(c,1));

t34 := v > ref(v,1);{}

涨停螺旋 : if(((t31 and t32) and t33) and t34,1,drawnull),nodraw,color002080;

rsv := ((close - llv(low,9)) / (hhv(high,9) - llv(low,9))) * 100;

k := sma(rsv,3,1);

d := sma(k,3,1);

j := (3 * k) - (2 * d);

kd金叉 := cross(k,d);

a1b := ema(((l + h) + (c * 2)) / 4,14);

a1xb := ((a1b - ref(a1b,1)) / ref(a1b,1)) * 100;

出击b := if((a1xb >= 0) and (barslast(cross(a1xb,0)) > 0),ref((c + o) / 2,barslast(cross(a1xb,0))),drawnull);

出击b金叉 := cross(出击b,0);

wmtm := close - ref(close,12);

动量金叉 := cross(wmtm,0);{}

var1 := (close > ref(close,1)) and (close > ref(close,2));

var2 := (ref(var1,1) and (close <= ref(close,1))) and (close >= ref(close,2));

var3 := (ref(var2,1) and (close >= ref(close,1))) and (close <= ref(close,2));

var4 := (ref(var3,1) and (close <= ref(close,1))) and (close >= ref(close,2));

var5 := (ref(var4,1) and (close >= ref(close,1))) and (close <= ref(close,2));

var6 := (ref(var5,1) and (close <= ref(close,1))) and (close >= ref(close,2));

var7 := (ref(var6,1) and (close >= ref(close,1))) and (close <= ref(close,2));

var8 := (ref(var7,1) and (close <= ref(close,1))) and (close >= ref(close,2));

var9 := (ref(var8,1) and (close >= ref(close,1))) and (close <= ref(close,2));

vara := (ref(var9,1) and (close <= ref(close,1))) and (close >= ref(close,2));

varb := (ref(vara,1) and (close >= ref(close,1))) and (close <= ref(close,2));

varc := (ref(varb,1) and (close <= ref(close,1))) and (close >= ref(close,2));

vard := (close < ref(close,1)) and (close < ref(close,2));

vare := (ref(vard,1) and (close >= ref(close,1))) and (close <= ref(close,2));

varf := (ref(vare,1) and (close <= ref(close,1))) and (close >= ref(close,2));

var10 := (ref(varf,1) and (close >= ref(close,1))) and (close <= ref(close,2));

var11 := (ref(var10,1) and (close <= ref(close,1))) and (close >= ref(close,2));

var12 := (ref(var11,1) and (close >= ref(close,1))) and (close <= ref(close,2));

var13 := (ref(var12,1) and (close <= ref(close,1))) and (close >= ref(close,2));

var14 := (ref(var13,1) and (close >= ref(close,1))) and (close <= ref(close,2));

var15 := (ref(var14,1) and (close <= ref(close,1))) and (close >= ref(close,2));

var16 := (ref(var15,1) and (close >= ref(close,1))) and (close <= ref(close,2));

var17 := (ref(var16,1) and (close <= ref(close,1))) and (close >= ref(close,2));

var18 := (ref(var17,1) and (close >= ref(close,1))) and (close <= ref(close,2));

k线金底 := (ref(((((((((((vard or vare) or varf) or var10) or var11) or var12) or var13) or var14) or var15) or var16) or var17) or var18,1)) and var1;

下跌 := ((((((((((vard or vare) or varf) or var10) or var11) or var12) or var13) or var14) or var15) or var16) or var17) or var18;

k线银底 := (下跌 and (c > o)) and (c > ref(c,1));

金银k线 := ref(k线银底,1) and k线金底;

hlc := ref(ma(((high + low) + close) / 3,10),1);

hv := ema(hhv(high,10),3);

lv := ema(llv(low,10),3);

麦克支撑压力 := ema((hlc * 2) - lv,3);

短线突击 := ema((c + ref(c,1)) / 2,3);

psy := ((count(close > ref(close,1),12)) / 12) * 100;

psyma := ma(psy,6);{}

预选安全区域 := (c <= 麦克支撑压力) and (c >= 短线突击);

做空衰歇 := cross(adx,mdi);

做多金叉 := cross(pdi,mdi);

拉升金叉 := cross(adx,adxr) and (pdi > mdi);

初选量能金叉 := 量能金叉 and (金银k线 or 抄底红箭);

初选基础池 := (预选安全区域 and (((金银k线 or 抄底红箭) or 动量金叉) or (做空衰歇 or 做多金叉))) and ((初选量能金叉 or cci金叉) or 出击a金叉);

动量金叉确认 := (动量金叉 or (ref(动量金叉,1) and (拉升金叉 or 做多金叉))) or (做多金叉 and 做空衰歇);

出击b金叉确认 := 出击b金叉 and ((ref(cci金叉 or kd金叉,1)) or 做空衰歇);

做多金叉确认 := 做多金叉 or (做空衰歇 and 拉升金叉);

macd金叉确认 := macd金叉 and ref(量能金叉,1);

kd金叉确认 := kd金叉 and (ref((金银k线 or 抄底红箭) or 做空衰歇,1));

稳操胜券 : if((ref(初选基础池,1) and ((动量金叉确认 or 出击b金叉确认) or 启动)) and ((做多金叉确认 or macd金叉确认) or kd金叉确认),1,drawnull),colora000ff;

追涨 : if(((((肉夹馍 or 平台起飞) or 启动) or 一阳穿三线) or 星线确认) or 涨停螺旋,1,drawnull),colorred;

关注 := ((((((((金银k线 + 抄底红箭) + 量能金叉) + cci金叉) + cross(出击a,0)) + cross(出击b,0)) + 拉升金叉) + 做多金叉) + kd金叉) + macd金叉;

drawband(关注,rgb(51,32,64),0,rgb(255,96,96));

stickline(稳操胜券,0,9.0,0.8,0),colorlimagenta;

stickline(涨停螺旋,0,4.0,0.3,0),color002080;

stickline(星线确认,0,3.5,0.0,0),colorff0080;

stickline(肉夹馍,0,3.0,1.3,0),colorred;

stickline(一阳穿三线,0,2.5,1.8,0),colorb040b0;

stickline(启动,0,2.0,2.3,0),color0080ff;

stickline(平台起飞,0,1.5,2.8,0),color6060a0;

追涨显示条件 := ((((肉夹馍 or 平台起飞) or 启动) or 一阳穿三线) or 星线确认) or 涨停螺旋;

金k线显示条件 := ((refx(稳操胜券 or 追涨显示条件,1)) or 初选基础池) or ((currbarscount <= 2) and 初选基础池);

银k线显示条件 := (refx(k线金底 and 金k线显示条件,1)) or ((currbarscount <= 2) and 初选基础池);

stickline(k线银底 and 银k线显示条件,0,0.5,3.5,0),colorligray;

stickline(金银k线 and 金k线显示条件,0,1.0,3.3,0),color006060;

图标显示 := ((refx(稳操胜券,1) or 稳操胜券) or 追涨显示条件) or ((currbarscount <= 2) and 初选基础池);

drawicon(抄底红箭 and 图标显示,0.3,1);

drawicon(出击a金叉 and 图标显示,1.0,16);

drawicon(出击b金叉 and 图标显示,2.0,17);

drawicon(cci金叉 and 图标显示,3.0,25);

drawicon(量能金叉 and 图标显示,4.0,26);

drawicon(kd金叉 and 图标显示,5.0,27);

drawicon(macd金叉 and 图标显示,6.0,34);

drawicon(做多金叉 and 图标显示,7.0,13);

drawicon(做空衰歇 and 图标显示,6.5,14);

drawicon(拉升金叉 and 图标显示,8.0,23);

drawicon(动量金叉 and 图标显示,9.5,30);

指标公式下载地址

好公式网提供全网最全的指标公式软件，感谢您的支持！鼠标双击图片可看大图！
下载请点击右侧“立即下载”，如只有源码，请点击本页面右侧的导入方法按图导入！
本站指标基于网友分享，仅供研究自学，勿作他用，本站对下载使用不承担任何责任！

上一指标公式：底部黑马副图 选股 通达信贴图选股

下一指标公式：数浪 主图 有未来必须的 通达信未来源码

相关通达信公式推荐

指标公式下载注意

☉ 好公式网发布的指标公式主要用于软件技术面分析，仅供参考，勿用于实际操作，据此操作风险自负！

☉ 解压密码：www.goodgongshi.com 就是好公式网域名，希望大家看清楚，切勿输错。

☉ tnc和tni格式指标公式，仅可以用通达信软件引入使用，例如可以用通达信软件引入使用指标公式；

☉ tne格式指标公式，仅可以用通达信软件公式编辑器5.0版导入，高版本兼容低版本；

☉ fnc格式指标公式，可以用大智慧软件新一代高速行情分析系统股票软件使用，少部分可以用分析家软件引入使用；

☉ alg格式指标公式，仅仅可以用飞狐交易师软件引入使用；exp格式指标公式，仅可以用大智慧经典版软件引入使用；

☉ hxf格式指标公式，仅可以用同花顺软件引入使用。

☉ 如果您发现下载软件链接错误，请联系管理员报告错误。

☉ 好公式网欢迎各位网友帮忙宣传转发本站网址，有您的支持，我们会做得更好！

☉ 本文爆涨临界点 副图 无未来 通达信未来源码仅供学习研究。